2026 Yamaha Wolverine X2 850 XT-R Trip Fit

On this page

Scope and caution · Trip-planning summary · Machine Snapshot · Stock Configuration Warning · What This Configuration Changes · Trip-Use Tradeoffs · Potential Limitations · Passenger and Group Considerations · Trail-System Considerations · Trip-Prep Checks · Recovery and Cargo · Who Should Pay Extra Attention · Sources

MACHINE TRAIL-FIT PROFILE

This profile covers the current 2026 Yamaha Wolverine X2 850 XT-R two-seat recreation configuration and the planning questions created by its 58.7-inch stance, 83.7-inch wheelbase, 115-inch length, 9.2-gallon fuel tank, and published wet weight.

Scope and caution

This page represents the 2026 Wolverine X2 850 XT-R only. Yamaha also lists 2026 Wolverine X2 1000 R-Spec and X2 1000 XT-R models, but their width, tires, ground clearance, engine, and wet weight differ. Do not blend those 1000 configurations into this profile. Verify the exact model name, tires, equipment, and model year on the machine being prepared.

Trip-planning summary

The X2 850 XT-R uses a two-seat recreation chassis with a 58.7-inch stance, 83.7-inch wheelbase, 115.0-inch overall length, 62.2-inch overall width, 75.3-inch overall height, 11.5-inch maximum ground clearance, and 1,698-pound wet weight. Those figures shape trailer loading, turning room, fuel planning, passenger cargo, and recovery preparation.

Machine Snapshot

Vehicle class: Recreation side-by-side / ROV
Seat layout: Two bucket seats
Engine: 847cc liquid-cooled parallel-twin
Stance width: 58.7 inches
Overall size: 115.0 × 62.2 × 75.3 inches (L × W × H)
Wheelbase: 83.7 inches
Maximum ground clearance: 11.5 inches
Fuel capacity: 9.2 gallons
Published weight: 1,698 pounds wet; Yamaha says wet weight includes standard equipment, all fluids, and a full tank of fuel, but excludes options and accessories
Factory tires: AT27 × 9-12 front and AT27 × 11-12 rear GBC Dirt Commander
Cargo / payload: Hydraulic piston-assist dump bed is part of the X2 platform; exact current 850 cargo capacity and bed dimensions are Unknown from the official specifications page used here
Cab/weather equipment: Exact standard roof, windshield, door, and rear-protection configuration is Unknown; verify the specific unit and accessory set
Winch/recovery equipment: Unknown; verify factory equipment and installed accessories

Stock Configuration Warning

This profile explains trip-planning tradeoffs; it is not a safety approval or route-compatibility verdict. Stock specifications may not match a modified or loaded machine. Use the current official map and obey posted signs, closures, direction, and vehicle restrictions. System-level eligibility does not open every route.

What This Configuration Changes

The 58.7-inch stance and 62.2-inch overall width should be measured again after tires, wheels, protection, doors, and other accessories are installed.
The 83.7-inch wheelbase and 115-inch length shape turning room, trailer placement, and recovery angles.
The 1,698-pound wet-weight basis includes a full tank, so trailer payload and ramp capacity should be checked against the loaded machine and gear.
The 9.2-gallon fuel capacity supports planning, but actual fuel use changes with terrain, load, pace, tire pressure, and weather.

Trip-Use Tradeoffs

The X2 850 XT-R keeps a fixed two-seat passenger layout while adding a dump-bed platform to a recreation chassis. That changes how the group approaches tools, recovery gear, rain layers, and personal cargo compared with a machine that has no bed. The 27-inch factory tires and 11.5-inch maximum ground clearance also belong in the stock-configuration checklist.

Potential Limitations

Confirm actual width after accessories, the loaded trailer footprint, bed and payload limits, the standard weather equipment, and the machine’s recovery points. The X2 1000 is not covered here; its published dimensions, tires, clearance, and weight are different.

Passenger and Group Considerations

With two bucket seats, the passenger plan is fixed. Decide before departure who carries recovery gear, tools, rain layers, spare fuel, communication equipment, and personal cargo. Treat bed capacity and passenger cargo as one combined loading plan.

Trail-System Considerations

Use the specific Trail Guide and verify the current official map, posted signs, closures, direction, and vehicle restrictions. Width, wheelbase, ground clearance, tire setup, trailer footprint, and weather exposure remain configuration questions.

Trip-Prep Checks for This Machine

Measure the actual machine with tires, wheels, roof, doors, windshield, and installed accessories.
Confirm trailer deck, ramp, tie-down, payload, and loading height against the 1,698-pound wet-weight basis and the actual trip load.
Check the GBC Dirt Commander tires, belt service history, fluids, battery, lighting, and recovery points.
Verify the dump-bed equipment, bed load limit, roof, windshield, doors, and rear protection on the specific unit.
Plan fuel stops and reserve space for tools, recovery gear, and passenger cargo.

Recovery and Cargo

Yamaha identifies a hydraulic piston-assist dump bed on the X2 platform, but the exact current 850 bed capacity and dimensions are Unknown in the official specification source used here. Confirm the bed label and vehicle limits, carry recovery gear matched to the actual machine, and stay within machine and trailer limits.

Who Should Pay Extra Attention

Pay extra attention if a trailer is shared with wider machines, if accessories change the 62.2-inch overall width or 75.3-inch height, if the group carries substantial recovery gear, or if someone is treating the X2 1000 specifications as though they apply to the X2 850.

Sources / Last Verified

Last Verified: August 9, 2026

2026 Yamaha Wolverine X2 850 XT-R — Hatfield-McCoy Trip Fit